Mulgrave Electrician — Business Park Work and 1970s Family Homes

Mulgrave is half office park and half family suburb, and the electrical work reflects that — three-phase boards one day, a kitchen rewire the next.

Elecool Electrical working on a commercial site in Mulgrave

Mulgrave has a commercial spine that most suburbs don't. The Springvale Road and Blackburn Road corridors carry office parks, warehouses and light industrial tenancies, and the electrical work there is a different animal — three-phase distribution, machine circuits, warehouse high-bay lighting, tenancy fit-outs and emergency lighting that has to be tested and logged on schedule.

The residential half is largely 1970s and 80s brick homes on generous blocks, plus later estates with double garages. These houses have good bones but boards that were never designed for the load a modern family puts through them. We upgrade them properly — A-grade licensed, $20M public liability, fixed price quoted before we start, and the same person on the tools who quoted the work.

Local work, local knowledge

What we typically handle in Mulgrave

  • Three-phase and machine circuits for Blackburn Road light industrial tenancies
  • Office fit-out power and data for Springvale Road business park tenancies
  • 1970s Mulgrave brick homes — board upgrades and kitchen circuit rewires
  • Warehouse high-bay LED conversions cutting lighting load and maintenance

On the ground in Mulgrave

Mulgrave's Two Halves — Business Parks and Brick Veneer

The commercial corridors along Springvale Road and Blackburn Road are where a lot of our Mulgrave work sits. Office tenancies need lighting zoned and switched sensibly, data and power in the right places, emergency and exit lighting maintained and logged, and a distribution board that isn't already full when the next tenant arrives. Industrial units need three-phase to machinery, isolators in reach, and enough spare capacity that adding a compressor isn't a whole new project. We quote all of it fixed price.

The residential side of Mulgrave is dominated by 1970s and 80s brick homes on decent blocks, plus later estate housing with double garages and higher ceilings. These homes typically came with one lighting circuit per area and a handful of power circuits. Today's kitchen alone — induction cooktop, oven, dishwasher, microwave, coffee machine — will out-draw the whole original design. Kitchen renovations are the most common trigger for a board upgrade in this suburb, and we prefer to do both at once.

Double garages are the other Mulgrave specialty. Most homes out this way have one, and that makes EV charging genuinely practical — the car parks off-street, the cable run from the board is usually short, and there's clear wall space to mount a unit. We're a MyEnergi-approved installer, so we do a lot of these. We check the main supply and existing household load first, because a 7kW charger sitting on top of ducted cooling and an induction cooktop needs the numbers to actually add up. If they don't, we'll tell you what has to change before you commit.

Typical work

The jobs we get called out for in Mulgrave

Industrial Three-Phase Work

Blackburn Road and Wellington Road industrial units. Three-phase distribution boards, machine circuits with local isolation, compressor and welder supplies, and enough spare ways to grow into. We test and certify everything and provide the paperwork your insurer and landlord will ask for.

Kitchen Renovation Rewiring

The most common Mulgrave home job. New circuits for induction cooktop, oven, dishwasher and appliance bench, all correctly protected, plus a board upgrade where the old one has no room. We work in with the cabinetmaker so rough-in happens before anything gets closed up.

EV Charger in Double Garages

Mulgrave's 1980s and 90s estates almost all have double garages, which makes charger installs clean. We assess main supply and existing load, run a dedicated protected circuit, mount and commission the unit. MyEnergi-approved installer, fixed price including the switchboard work.

Support

FAQ — electrical work in Mulgrave

Still have questions?

Ask the team
Do you do commercial electrical in the Mulgrave business parks?
Yes — office tenancies and industrial units along Springvale Road, Blackburn Road and Wellington Road are regular work for us. Distribution boards, tenancy fit-outs, machine circuits, high-bay lighting and emergency lighting maintenance. A-grade licensed with $20M public liability, which is what most Mulgrave landlords require before site access.
Can you install three-phase in a Mulgrave warehouse or workshop?
Yes. Many Mulgrave industrial units already have three-phase at the main switchboard but no distribution to where the machines sit. We extend it properly with correctly rated submains, local isolators and RCD protection where required. If the site is single phase only, we can arrange the supply upgrade with the distributor.
Will my 1970s Mulgrave home handle an EV charger?
Often yes, but not always without a board upgrade. Homes from that era typically have a 63A single-phase supply and boards with no spare capacity. We measure existing demand, check the main and the service, and tell you honestly whether you need a straight install, a board upgrade, or load management on the charger itself.
Do you do emergency and exit light testing for Mulgrave offices?
Yes. Commercial buildings need emergency lighting tested on a six-monthly cycle with results recorded in a logbook. We carry out the discharge tests, replace failed fittings and batteries, and hand you documentation that stands up to a fire safety audit. Regular clients in the Springvale Road office parks are on scheduled visits.
How much of a kitchen do you need to rewire in a Mulgrave renovation?
Usually more than people expect. Induction cooktops and ovens each want their own circuit, the dishwasher and appliance bench want another, and the original 1970s kitchen circuit won't carry it. We rough in during the demolition stage, before plaster goes back, which is far cheaper than retrofitting once the cabinetry is in.
How quickly can you get to Mulgrave?
Mulgrave is about ten to fifteen minutes from our Rowville base along Wellington Road — one of the closest suburbs we service. We're through here most days. For urgent faults, call 0418 576 387 and we'll usually give you a same-day window. We work seven days a week, 7am to 5pm.

Nearby suburbs we also cover from Mulgrave

Same crew, same pricing, same standards across our service area.

Request a quote

Tell us what you need. We'll come back within a working day.

Real humans, real responses — not a chatbot queue. Most quotes go out the same day.

  • Fixed-price quotes, no hourly surprises
  • Same-day callouts for emergencies
  • Fully licensed (A-grade) and insured ($20M)
  • Servicing all of South East Melbourne

Enquire now

We respond within 4 business hours. Your details stay private — see our privacy policy.

Protected by reCAPTCHA — Google Privacy & Terms apply.